Service FAQ
Quickly find the right answer to frequently asked questions about our products
Service - FAQ
FAQ Frequently Asked Questions
Most wanted questions
here you can see the answers to the questions our customers are looking for most often.
Heating (5)
Tuxhorn offers a heat meter set for heating circuit stations. The scope of delivery includes transition nipples for the installation of a heat meter in the return of the heating circuit station (instead of the pump compensating pipe) as well as a T-piece including sensor adapter for the installation of the additional flow sensor of the heat meter.
Instead of the pump compensating pipe, the tubra®-mag-jet is installed in the return pipe of the heating circuit station. The required construction length of the tubra® mag-jet results from the dimension of the mounted heating circuit group. This applies to both mixed and unmixed heating circuit stations.
By turning 45°, the gravity brake integrated in the ball valve can be set up manually.
- Yes, for DN25 and DN32 heating circuit groups, the flow can be converted from left to right on site without any additional accessories required.
- Bei den DN40 Heizkreisgruppen ist ein Umbauset erforderlich.
Pipes and fittings must be insulated at 50% of their nominal diameter at junctions, crossings and central manifolds in accordance with the Building Energy Act (GEG). For heating circuit groups, this means a fully enclosing minimum wall thickness and separation of the flow and return lines. The Tuxhorn tubra®-PGM/PGR pump groups from DN20 to DN32 meet this requirement.
FAQ Full Text Search
here you can search for your questions in all categories.
Heating (6)
By turning 45°, the gravity brake integrated in the ball valve can be set up manually.
Instead of the pump compensating pipe, the tubra®-mag-jet is installed in the return pipe of the heating circuit station. The required construction length of the tubra® mag-jet results from the dimension of the mounted heating circuit group. This applies to both mixed and unmixed heating circuit stations.
- Yes, for DN25 and DN32 heating circuit groups, the flow can be converted from left to right on site without any additional accessories required.
- Bei den DN40 Heizkreisgruppen ist ein Umbauset erforderlich.
Pipes and fittings must be insulated at 50% of their nominal diameter at junctions, crossings and central manifolds in accordance with the Building Energy Act (GEG). For heating circuit groups, this means a fully enclosing minimum wall thickness and separation of the flow and return lines. The Tuxhorn tubra®-PGM/PGR pump groups from DN20 to DN32 meet this requirement.
A mixer with a special 3D rotary vane design always produces the same pressure drop over the entire control range at different volume flows. This achieves a high control quality. This can be recognized by a quiet servomotor that can control a constant flow temperature even at low volume flows.
This means that different kvs values are no longer required for heating circuit groups, which is a great advantage in the planning, selection and logistics of heating circuit groups.
Tuxhorn offers a heat meter set for heating circuit stations. The scope of delivery includes transition nipples for the installation of a heat meter in the return of the heating circuit station (instead of the pump compensating pipe) as well as a T-piece including sensor adapter for the installation of the additional flow sensor of the heat meter.
Latest FAQs
Heating (5)
Tuxhorn offers a heat meter set for heating circuit stations. The scope of delivery includes transition nipples for the installation of a heat meter in the return of the heating circuit station (instead of the pump compensating pipe) as well as a T-piece including sensor adapter for the installation of the additional flow sensor of the heat meter.
Instead of the pump compensating pipe, the tubra®-mag-jet is installed in the return pipe of the heating circuit station. The required construction length of the tubra® mag-jet results from the dimension of the mounted heating circuit group. This applies to both mixed and unmixed heating circuit stations.
By turning 45°, the gravity brake integrated in the ball valve can be set up manually.
- Yes, for DN25 and DN32 heating circuit groups, the flow can be converted from left to right on site without any additional accessories required.
- Bei den DN40 Heizkreisgruppen ist ein Umbauset erforderlich.
Pipes and fittings must be insulated at 50% of their nominal diameter at junctions, crossings and central manifolds in accordance with the Building Energy Act (GEG). For heating circuit groups, this means a fully enclosing minimum wall thickness and separation of the flow and return lines. The Tuxhorn tubra®-PGM/PGR pump groups from DN20 to DN32 meet this requirement.
Popular FAQs
Heating (5)
Tuxhorn offers a heat meter set for heating circuit stations. The scope of delivery includes transition nipples for the installation of a heat meter in the return of the heating circuit station (instead of the pump compensating pipe) as well as a T-piece including sensor adapter for the installation of the additional flow sensor of the heat meter.
Instead of the pump compensating pipe, the tubra®-mag-jet is installed in the return pipe of the heating circuit station. The required construction length of the tubra® mag-jet results from the dimension of the mounted heating circuit group. This applies to both mixed and unmixed heating circuit stations.
By turning 45°, the gravity brake integrated in the ball valve can be set up manually.
- Yes, for DN25 and DN32 heating circuit groups, the flow can be converted from left to right on site without any additional accessories required.
- Bei den DN40 Heizkreisgruppen ist ein Umbauset erforderlich.
Pipes and fittings must be insulated at 50% of their nominal diameter at junctions, crossings and central manifolds in accordance with the Building Energy Act (GEG). For heating circuit groups, this means a fully enclosing minimum wall thickness and separation of the flow and return lines. The Tuxhorn tubra®-PGM/PGR pump groups from DN20 to DN32 meet this requirement.
UFAQ’s category list
Heating (6)
By turning 45°, the gravity brake integrated in the ball valve can be set up manually.
Instead of the pump compensating pipe, the tubra®-mag-jet is installed in the return pipe of the heating circuit station. The required construction length of the tubra® mag-jet results from the dimension of the mounted heating circuit group. This applies to both mixed and unmixed heating circuit stations.
- Yes, for DN25 and DN32 heating circuit groups, the flow can be converted from left to right on site without any additional accessories required.
- Bei den DN40 Heizkreisgruppen ist ein Umbauset erforderlich.
Pipes and fittings must be insulated at 50% of their nominal diameter at junctions, crossings and central manifolds in accordance with the Building Energy Act (GEG). For heating circuit groups, this means a fully enclosing minimum wall thickness and separation of the flow and return lines. The Tuxhorn tubra®-PGM/PGR pump groups from DN20 to DN32 meet this requirement.
A mixer with a special 3D rotary vane design always produces the same pressure drop over the entire control range at different volume flows. This achieves a high control quality. This can be recognized by a quiet servomotor that can control a constant flow temperature even at low volume flows.
This means that different kvs values are no longer required for heating circuit groups, which is a great advantage in the planning, selection and logistics of heating circuit groups.
Tuxhorn offers a heat meter set for heating circuit stations. The scope of delivery includes transition nipples for the installation of a heat meter in the return of the heating circuit station (instead of the pump compensating pipe) as well as a T-piece including sensor adapter for the installation of the additional flow sensor of the heat meter.
FAQs without area hot water
Heating (6)
By turning 45°, the gravity brake integrated in the ball valve can be set up manually.
Instead of the pump compensating pipe, the tubra®-mag-jet is installed in the return pipe of the heating circuit station. The required construction length of the tubra® mag-jet results from the dimension of the mounted heating circuit group. This applies to both mixed and unmixed heating circuit stations.
- Yes, for DN25 and DN32 heating circuit groups, the flow can be converted from left to right on site without any additional accessories required.
- Bei den DN40 Heizkreisgruppen ist ein Umbauset erforderlich.
Pipes and fittings must be insulated at 50% of their nominal diameter at junctions, crossings and central manifolds in accordance with the Building Energy Act (GEG). For heating circuit groups, this means a fully enclosing minimum wall thickness and separation of the flow and return lines. The Tuxhorn tubra®-PGM/PGR pump groups from DN20 to DN32 meet this requirement.
A mixer with a special 3D rotary vane design always produces the same pressure drop over the entire control range at different volume flows. This achieves a high control quality. This can be recognized by a quiet servomotor that can control a constant flow temperature even at low volume flows.
This means that different kvs values are no longer required for heating circuit groups, which is a great advantage in the planning, selection and logistics of heating circuit groups.
Tuxhorn offers a heat meter set for heating circuit stations. The scope of delivery includes transition nipples for the installation of a heat meter in the return of the heating circuit station (instead of the pump compensating pipe) as well as a T-piece including sensor adapter for the installation of the additional flow sensor of the heat meter.